Call 312.552.0169


 

Accessories

Deck out your Segway PT with the latest accessories!

We’ve got the latest Segway PT accessories right here. If you don’t see what you’re looking for, just give us a call!

Storage Bag – $159

Your keys, wallet, mobile phone and water bottle – take them all with you on your Segway Personal Transporter (PT) glide. Segway’s handlebar bag features a molded plastic shell that assures your personal items are safe and organized. It also detaches from the PT, so you can easily take it with you once you’ve reached your destination. Finally, you can personalize the handlebar bag with logos or whatever makes you happy. It’s a must have!

Specs: Dimensions (W x D x H): 11.5 x 8 x 15.5 inches / (29.2 x 20.3 x 39.3 cm)

Compatible with: Segway i2, Segway x2, Segway i2 SE, Segway x2 SE

NOT Compatible with: i2 Patroller, x2 Patroller, i167, p133, e167, i170, i180, XT, GT

Kit Includes:

  • 1 Handlebar bag
  • 1 Mounting bracket with hardware
  • Instruction Manual

Comfort Mats- $149

Cushioned by thick, industrial grade rubber that absorbs shocks and jolts, comfort mats allow you to ride on and on without getting fatigued. Two mats create one set.

Compatible with: Segway i2, Segway x2, i2 Patroller, x2 Patroller

NOT Compatible with: i167, p133, e167, i170, i180, XT, GT, Segway i2 SE, Segway x2 SE

Kit Includes: • 1 Pair of Comfort Mats Instruction Manual Content goes here

 

i2/x2 Modular Parking Stand – $66

You’ll have to step off the Segway PT at some point. When you do, reach level ground, turn off the Segway PT and with just a quick tap of your foot, you’ll be parked and ready to go about your business. The sleek and simple design pivots up 180 degrees left or right and locks in place for when you’re ready to glide again.

The parking stand was designed with safety in mind and therefore there is a mechanical fuse built into the leg to allow for breakage in the event of misuse of the accessory. Misuse of the accessory could be, but is not limited to, attempting to step on a PT with the parking stand deployed, failure to fully stow the parking stand prior to riding or inadvertent deployment while riding.  If it does break, it’s easy to replace and can be installed with just one screw. We provide a spare leg and fastener with every kit.

Compatible with: Segway i2 (Gen II Only) & i2 Patroller (Gen II Only)

NOT Compatible with: Segway i2 SE, x2 model or Gen I series

Kit Includes:

  • 1 Parking Stand with mounting hardware
  • 1 Replacement leg with replacement hardware
  • Instruction Manual

Accessory Bar Kit- $60

The accessory bar attaches to the handlebar, providing plenty of space to mount lights, reflective labels and other accessories. It’s simple to install and is adjustable, so you can angle it any way you’d like.

Compatible with: Segway i2, Segway x2

NOT Compatible with: i2 Patroller, x2 Patroller, i167, p133, e167, i170, i180, XT, GT

Kit Includes: 1 Accessory Bar with mounting hardware and Instruction Manual

 

Lithium-ion Battery- $999

 

The Saphion® lithium-ion batteries that power the Segway Personal Transporter (PT) were developed in conjunction with Valence Technology, Inc. On a single charge, the PT can travel up to 24 miles/38 km depending on model, terrain, payload and riding style. The long-life, low-maintenance batteries can operate at temperatures as low as 14º F/-10º C and come with a 1-year warranty.

PLEASE NOTE: Replacement batteries are sold separately, not in pairs. If you need 2 batteries, please order accordingly. A lithium-ion battery is considered hazardous material.

 

Ramp Kit-$349

The ramp kit allows you to easily pack any Segway PT into a car’s trunk or a truck’s bed. The top grips your trunk or truck bed while the traction foot helps anchor the ramp to the ground. Once the ramp kit is secure, guide* your Segway PT up it. When you’re done, the ramps fold in half and fit neatly into their own carrying case for easy storage.

Specs: Folded (L): 35 in (96.5 cm); Deployed (L x W): 68 x 6.5 in (172 x 16.5 cm); Weight: 12 lbs each, 24 lbs total (5.4 kg each, 10.8 kg total)

Compatible with: All Segway PTs

Kit Includes:

  • 1 Pair or Ramps
  • 1 Custom Carry Case
  • Instructions

 

Segway Hard Cases (set of 2) $299

Famous for classic motorcycle cases, the designers at GIVI created a signature case for Segway. A rugged outer shell protects the items you lock securely into the case and onto your Segway PT. Two-year warranty.

Note: Universal Cargo Plates are REQUIRED to install Segway Hard Cases i2 Lower Cargo Frames are also REQUIRED to install Segway Hard Cases on a Segway i2 or i2 SE

Specs: Capacity: 21 ltr Opening: 16.5 x 7.5 in / 41.9 x 19.0 cm Bottom: 12.0 x 6.0 in / 30.5 x 15.2 cm Height: 13.5 in / 34.2 cm Weight: 3.3 lbs each 1.5 kg

Compatible with: Segway i2, Segway i2 SE, Segway x2, Segway x2 SE

Kit Contents:

  • 2 GIVI Hard cases with 2 keys
  • 2 Mounting brackets with hardware
  • Instruction Manual

 

i2 Lower Cargo Frame (set of 2) $175

Made of non-corrosive aluminum tubing with a weather-resistant powder-coated finish, this cargo frame gives you the leverage needed to lift and move a Segway PT with ease. Once installed, it accommodates lighting, cargo, or anything else you need to bring along on your ride.

Compatible with: Segway i2, i2 Patroller

NOT Compatible with: Segway x2, x2 Patroller, i167, p133, e167, i170, i180, XT, GT

Kit Includes:

  • 2 Segway i2 Lower Cargo Frames with installation hardware
  • Instruction Manual

 

Universal Cargo Plate (set of 2) $259

To make the most of your Segway PT, equip it with a larger carrying area with this multifunctional cargo plate. Bungee hooks and cargo nets can be used for expanded flexibility. Can be installed on the i2 or x2 lower cargo frame in two positions for your preferred configuration.

Note: i2 Lower Cargo Frames are REQUIRED to install Universal Cargo Plates on a Segway i2.

Specs: Capacity: 15 lbs (6.8 kg) each Dimensions (L x W): 17.5 x 5.8 in / (44.4 x 14.7 cm)

Compatible with: Segway i2, Segway x2, i2 Patroller, x2 Patroller

NOT Compatible with: i167, p133, e167, i170, i180, XT, GT

Kit Contents:

  • 2 Universal Cargo Plates
  • 2 Sets of Mounting Clamps with installation hardware
  • Instruction Manual

 

i2 Wheel Kit- $190

This is your entire wheel kit, not just the rubber tire. The wheel assembly is a genuine Segway part and its size is specific to your i2 Personal Transporter’s software. The non-marking traction controlled tire diameter is 19″(48 cm) (100/65 R14) and mounts on a custom i2 rim. Its tread pattern and rubber compound have been specifically selected to provide traction on a variety of terrain. Segway requires that PT riders use only genuine Segway wheels and tires given that they are an integral component of your PT. Keep in mind that you may re-use fasteners when replacing a wheel.

Compatible with: Segway i2

NOT Compatible with: Segway x2, x2 Patroller, i167, p133, e167, i170, i180, XT, GT

Kit Includes:

  • 1 wheel assembly
  • Instruction Manual

 

X2 Tire and Wheel Kit – $299

This is your entire wheel kit*, not just the rubber tire. The wheel assembly is a genuine Segway part and its size is specific to your x2 Personal Transporter’s software. The deeply treaded, all-terrain tire diameter is 21″ (53 cm) (21×7 R10) and mounts on a x2 rim. Its tread pattern and rubber compound have been specifically selected to provide traction on a variety of challenging terrain as well as a smooth ride on pavement. Segway requires that PT riders use only genuine Segway wheels and tires given that they are an integral component of your PT. Keep in mind that you may re-use fasteners when replacing a wheel.

Compatible with: Segway x2

NOT Compatible with: Segway i2, i2 Patroller, i167, p133, e167, i170, i180, XT, GT

Kit Includes:

  • 1 Wheel Assembly
  • Instruction Manual

*A hub adapter is not included. You may re-use a hub adapter from another PT as it is common to both the x2 and x2 Turf (1)

 

InfoKey Holder with Zipper- $15

Looking for a convenient place to keep you InfoKey so it doesn’t get lost? This stylish case was custom designed to hold the Segway InfoKey. It zips closed on the top, has an integrated belt clip on the back and features the Segway logo embossed on the front.

Compatible with: Segway i2, Segway x2, i2 Patroller, x2 Patroller

NOT Compatible with: i167, p133, e167, i170, i180, XT, GT

 

LED headlamp for SegwayLed Headlight- $175

Light your way with this high powered, energy efficient, 200-lumen LED light. Powered by 4 easy to replace AA batteries (not included), this light delivers two hours of high beam, eight hours of low beam or six hours of flashing light. It also features a low-battery indicator light and auto-dimming to extend performance. This accessory fits perfectly on the standard accessory bar, side cargo frames or Patroller specific accessory bar (each sold separately). Available in a chrome finish with “Segway” engraving or in an anodized black finish.

Compatible with: Segway i2, Segway x2, i2 Patroller, x2 Patroller

NOT Compatible with: i167, p133, e167, i170, i180, XT, GT

Kit Includes:

  • 1 LED Headlight with mounting strap
  • 2 battery holders (includes 1 spare)
  • 1 battery holder case with mounting straps
  • Instruction Manual